|
Stephenson Link Reverse
Unlike slip eccentric reversing, the Stephenson Link also permits variable cutoff. Varying the steam expansion according to the load gives best economy. Suitable for use with our Single Cylinder, Compound, Double Simple, or Triple Expansion engines.
CASTINGS $ 250
|
PLANS: AC.01
|
|
|
|
Feedwater / Air - Condensate
Pumps
Crosshead driven feedwater / air- condensate pumps. Driving the pumps from the crosshead is traditional and delivers feedwater / removes condensate proportional to the engine speed. For use with our Single Cylinder, Compound, Double Simple, or Triple engines.
CASTINGS $ 250
|
PLANS: AC.02
|
|
|
|
Hydrostatic Lubricator
4 - 15 HP up to 200psi
Provides an automatic, manually adjustable method of delivering internal lubrication to the steam cylinder / piston. Constructed from readily available pipe, valves and other off-the-shelf components. Suggested piping diagram included.
|
PLANS: AC.03
|
|
|
|
Hydrostatic Lubricator
15 - 40 HP up to 600psi
Utilizing the same concept as the lubricator above, this robust unit is designed for the higher pressures of our enclosed, single acting engines. Constructed from readily available pipe, valves and other off-the-shelf components. Suggested piping diagram included.
|
PLANS: AC.04
|
|
|
|
Steam Atomizing
Oil Burner, 4 - 7 HP
The use of steam to vaporize the fuel mixture eliminates the need for fans, blowers, and other electrical components. Burns fuel oil or other light oils such as kerosene or diesel. Easy to disassemble and adjust from outside the boiler. This unit works well with our 4 - 7 HP Ofeldt boiler.
|
PLANS: AC.05
|
|
|
|
Water Separator & Scale Trap
Water and / or scale may be carried over in the steam from the boiler. Either can be extremely hard on the engine, causing premature wear and breakage. In a drum type boiler this is easy to control, but not with a monotubular design. For use with our Monotube Boilers and can be constructed from readily available components. Rated to 1,000psi.
|
PLANS: AC.06
|
